Preparation for startup → Startup operation → Set ice size → Wait for ice making → Take ice → Shutdown and clean
The following are detailed steps for using an ice maker, which are based on the operation guides from multiple authoritative sources:
1. Preparation for startup
Check the power supply and water source: Make sure the power plug is firmly inserted into the socket, the power switch is in the off state, and check whether the water in the water tank is sufficient (it must reach the "MAX" scale line or the manufacturer's recommended water level).
Environmental check: Clean up surrounding debris, ensure good ventilation, and avoid high temperature or humid environment affecting operation.
2. Startup operation
Start the machine: After turning on the power switch, the ice maker will self-check (about 2 minutes), and the indicator light will light up to indicate that it has entered the working state.
Mode selection: Some commercial models require manual mode selection (such as pre-cooling, ice making, ice removal, etc.), and household models usually default to automatic mode.
3. Set the size of ice cubes
Adjust the thickness: Use the "plus/minus key" or knob on the operation panel to adjust (each press increases or decreases the ice making time by 1 minute, and the ice bridge thickness is recommended to be about 3mm).
Special functions: such as scheduled ice making (press the plus key to set 1-18 hours when the machine is turned off) or switch display modes (condenser temperature/water temperature).
4. Waiting for ice making
Ice making cycle: About 6-13 minutes/time for household models, and longer for commercial models due to different ice thickness.
Status monitoring: The progress can be observed through the indicator light or display screen. Hot air will be released when defrosting (about 1.5 minutes).
5. Taking ice cubes
Precautions: The machine will automatically pause when the ice is full, and you need to wait for 3 minutes to restart after taking the ice; avoid using sharp tools to take ice.
6. Shutdown and Cleaning
Daily Maintenance: After shutting down, clean the water tank, ice basket and internal pipes regularly (clean water is recommended, chemical agents are prohibited). For some models, you need to press and hold the "cleaning button" to start the automatic cleaning program (about 20-30 minutes).
